Shopping Bag (0)
You are $50.00 away from Free Shipping.
 
 
SP-35 AIRBRUSH
  • STEP 1:

    Using tweezers or your fingers, place the brass nozzle on the front of the airbrush.

  • STEP 2:

    Screw on the nozzle to the tip of the airbrush.

  • STEP 3:

    Screw on the nozzle cap.

  • STEP 4:

    Screw on the needle cap.

  • STEP 5:

    Hold the airbrush in your hand at a 45 degree angle, insert the trigger sideways into the body and twist so the lines face the front of the airbrush body.

  • STEP 6:

    With the body at an angle, grasp the needle chucking guide and insert it into the back of the airbrush. This action will push the trigger forward.

  • STEP 7:

    Slide the spring over the needle chucking guide.

  • STEP 8:

    Screw on the spring case, twisting clockwise.

  • STEP 9:

    Gently insert the needle.

  • STEP 10:

    Screw on the needle chucking nut.

  • STEP 11:

    Screw on the tail cap.

  • STEP 12:

    Your Airbrush is now assembled!

Featured Video: Assembling Your Airbrush (SP-35)
SE-50 AIRBRUSH
  • STEP 1:

    Using tweezers or your fingers, place the brass nozzle on the front of the airbrush.

  • STEP 2:

    Screw on the nozzle to the tip of the airbrush.

  • STEP 3:

    Screw on the nozzle cap.

  • STEP 4:

    Screw on the needle cap.

  • STEP 5:

    Hold youar airbrush in your hand at a 45 degree angle. Insert the trigger lever in to the body. Make sure it resembles an S when inserted.

  • STEP 6:

    Place the trigger in the body making sure the piston goes through to the bottom of the airbrush. Insert the needle chucking guide behind the trigger lever.

  • STEP 7:

    Slide the spring over the needle chucking guide.

  • STEP 8:

    Screw on the spring case, twisting clockwise.

  • STEP 9:

    Gently insert the needle.

  • STEP 10:

    Screw on the needle chucking nut.

  • STEP 11:

    Screw on the tail cap.

  • STEP 12:

    Your Airbrush is now assembled!

Featured Video: Assembling Your Airbrush (SE-50)

 Back to Top