Assembling Your System
STEP 1 Stand your Aircompressor upright on a flat surface and turn your Dial to 3 o’clock.
STEP 2 Take one end of the Flex Airhose and connect it to the Nozzle of the Aircompressor. Then connect the other end to the Airbrush.
STEP 3 Insert the A/C Adapter to the back of the Aircompressor and plug it into a nearby outlet.
Your Pods: Prepare. Attach. Release.
SHAKE IT Always shake well before every use for smooth color application.
CAPS OFF Remove the Chrome Cap and Tamper Seal from the Airpod.
LOOSEN UP Upon first use, or as needed, pull on the Clear Loop while holding the Airpod Tip up.
LET IT SPRAY Open the Plug before every use to allow makeup to spray. Be sure to close when not in use.
ATTACH IT To attach the Airpod, press down on the Release Button and push the Airpod horizontally into the Airbrush until you feel it pop into place.
RELEASE IT To release the Airpod, press down on the Release Button and pull the Airpod away from the Airbrush.
Let’s Get Started!
Start with a Flawless Foundation
STEP 1 Press the Power Button on the top of your Aircompressor. You’ll feel air flowing through the tip of the Airpod.
STEP 2 Turn the Dial to 3 o’clock – the optimal setting for a flawless Airpod Foundation application.
STEP 3 Hold your Airbrush like a pencil, pointed downward, 4-6 inches away. Gently pull back on the Trigger and move in small circular motions.
STEP 4 Stop & Look. Repeat STEP 3 until you achieve your desired level of coverage.