Pro Plus Perfect Canvas Deluxe Airbrush Kit

Attaching the Reversible Airbrush Holder: First attach the small round cushion tabs on the inside of the two hooks of the holder. This will reduce vibration on your airbrush gun. The holder can be placed on either the right or left side on top of the Pro Plus unit.

Attaching the Airhose to the Compressor: Screw one end of the 1/8" metal fitting of the Deluxe Flex Airhose on to the 1/8" metal fitting on the compressor. Make sure that the fitting is tightened all the way so you will not lose pressure.

Attaching Your Airbrush Gun: First be sure that your gun has a 1/8" metal fitting. Screw the end of your Deluxe Flex Airhose to the bottom of your airbrush gun.

Once ready for use, be sure to press down on the trigger of your gun before turning on the unit. This will release any trapped air. While the trigger is down, turn the unit on and air will begin to flow.

To regulate air pressure, adjust the pressure dial regulator on the front of the unit. Turn the pressure dial left to increase pressure and right to decrease pressure.

The Pro Plus comes equipped with a safety shut-off which will turn the unit off after 15 minutes of running.

To avoid back pressure and to keep your unit running at optimum performance, keep the pressure valve at 1/16" from the highest pressure setting. You will not lose any pressure and this will help the life of the compressor motor.

STEP 1: Using airbrush wrench (part 24) or your fingers, place the brass nozzle on the front of the airbrush gun.

STEP 2: Screw on the nozzle to the tip of the airbrush gun until securely tightened.

STEP 3: Screw on the nozzle cap.

STEP 4: Screw on the needle cap.

STEP 5: Hold the airbrush gun in your hand at a 45 degree angle, insert the trigger sideways into the body and twist so the lines face the front of the airbrush body.

STEP 6: With the body at an angle, grasp the needle chucking guide and insert it into the back of the airbrush gun. This action will push the trigger forward.

STEP 7: Slide the spring over the needle chucking guide.

STEP 8: Screw on the spring case, twisting clockwise.

STEP 9: Gently insert the needle.

STEP 10: Screw on the needle chucking nut.

STEP 11: Screw on the handle.

STEP 12: Your SP-35 Airbrush Gun is now assembled!

STEP 1: Attach the airbrush gun to compressor hose using the metal screw-on connector.

STEP 2: Drop makeup into airbrush cup. For use with airbrush foundation, start with 4-6 drops of makeup. For blush, highlighter and other colors, start with 3-4 drops.

STEP 3: Turn on compressor and bring airbrush gun up to 4-6 inches from face.

STEP 4: Begin makeup application. Always start by releasing air first, pressing down on trigger to release air. Next, pull back on trigger to release makeup. Make sure the air is on at all times during application.

STEP 5: Begin airbrush makeup application. Pull back on trigger for makeup control.

STEP 6: Apply airbrush makeup in small circular motions. Keep moving and watch carefully so as not to overspray. It is important to stop periodically and review your work.

STEP 7: Move the airbrush gun 4-6" away from the face as necessary and adjust the dial pressure on the compressor as needed.

• For silicone/oil-based formulas use S/B Airbrush Cleaner
• For alcohol-based formulas use Alcohol 99%
• For water-based formulas use water

STEP 2: Add a few drops of cleaning solution to the cup.

STEP 3: Using a cotton swab or small brush, swish the cleaning solution around the cup.

STEP 4: Spray the solution through the airbrush gun onto a tissue or into the Pro Airbrush Cleaning Pot.

• Apply to areas of the face hit by the sun (cheeks, nose, forehead)
• Apply under foundation for a subtle sun-kissed glow
• Apply over foundation for a more tanned effect without any orange overtones

If needed, mix different concealer shades to match your foundation.

Before you apply, mix the concealer and your perfectly matched foundation on the the back of your hand. The mixture will help set the concealer and make the application look as flawless as your skin.

Base Primer: AQUA, ISODO-DECANE, DIMETHICONE, CYCLOPEN-TASILOXANE, BUTYLENE GLYCOL, SILICA, VINYL DIMETHICONE/METHI- CONE SILSESQUIOXANE CROSS- POLYMER, GLYCERIN, DIMETHICONE- /VINYL DIMETHICONE CROSS- POLYMER, PEG/PPG-18/18 DIMETHICONE,CAPRYLIC/CAPRIC TRIGLYCERIDE, CYCLOTETRASI- LOXANE, DISODIUM EDTA, PHENOXYETHANOL

Perfect Canvas Airbrush Foundation: WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, TRIMETHYLSILOXYSILICATE, PHENYL TRIMETHICONE, METHYL TRIMETHICONE, POLYETHYLENE, DIMETHICONE, SILICA, DISTEARDIMONIUM HECTORITE, BUTYLENE GLYCOL, SORBITAN SESQUIOLEATE, SODIUM CHLORIDE, CAPRYLYL GLYCOL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, PROPANEDIOL, PHENOXYETHANOL, PROPYLENE CARBONATE, DIMETHYL ISOSORBIDE, ISOPROPYL TITANIUM TRIISOSTEARATE, HEXYLENE GLYCOL, 1,2-HEXANEDIOL, POLYGLUTAMIC ACID, DIMETHICONOL, DIPROPYLENE GLYCOL, BETULA ALBA (WHITE BIRCH) BARK EXTRACT, SODIUM BENZOATE, SODIUM CITRATE, LYCIUM BARBARUM (GOJI BERRY) FRUIT EXTRACT, CENTELLA ASIATICA (GOTU KOLA) EXTRACT, TOCOPHEROL, PALMITOYL HEXAPEPTIDE-14. [+/- TITANIUM DIOXIDE (CI 77891), BISMUTH OXYCHLORIDE (CI 77163), IRON OXIDES (CI 77491, CI 77492, CI 77499)]

Liquid Blush: AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, COCONUT ALKANES, TRIMETHYLSILOXYSILICATE, POLYMETHYLSILSESQUIOXANE, METHYL TRIMETHICONE, POLYETHYLENE, POLYSILICONE-11, DIMETHICONE, SILICA, BUTYLENE GLYCOL; CYCLOMETHICONE, DIMETHICONE/PEG-10/15 CROSSPOLYMER, DIMETHICONOL, DIPROPYLENE GLYCOL, DISTEARDIMONIUM HECTORITE, ISOPROPYL ALCOHOL, PEG/PPG-18/18 DIMETHICONE, PEG/PPG-20/15 DIMETHICONE, POTASSIUM SORBATE, PROPYLENE CARBONATE, SODIUM BENZOATE, SODIUM CHLORIDE, SODIUM CITRATE, SORBITAN SESQUIOLEATE, TOCOPHEROL, TOCOPHERYL ACETATE, TRIETHOXYCAPRYLYLSILANE, [+/-:CI 15850, CI 77163, CI 77491, CI 77492, CI 77499, CI 77891]

Liquid Highlighter in Pink Pearl: WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, MICA (CI 77019), TRIMETHYLSILOXYSILICATE, BUTYLENE GLYCOL, COCONUT ALKANES, METHYL TRIMETHICONE, DIMETHICONE, SORBITAN SESQUIOLEATE, TOCOPHEROL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, DISTEARDIMONIUM HECTORITE, POLYSILICONE-11, PROPYLENE CARBONATE, DIPROPYLENE GLYCOL, SODIUM CHLORIDE, SODIUM CITRATE, PHENYL TRIMETHICONE, POTASSIUM SORBATE, SODIUM BENZOATE. [+/ -: IRON OXIDES (CI 77491) TITANIUM DIOXIDE (CI 77891)]

Liquid Highlighter in Rose Gold: WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, TRIMETHYLSILOXYSILICATE, BUTYLENE GLYCOL, MICA (CI 77019), COCONUT ALKANES, METHYL TRIMETHICONE, DIMETHICONE, SORBITAN SESQUIOLEATE, TOCOPHEROL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, DISTEARDIMONIUM HECTORITE, POLYSILICONE-11, PROPYLENE CARBONATE, DIPROPYLENE GLYCOL, SODIUM CHLORIDE, SODIUM CITRATE, PHENYL TRIMETHICONE, SYNTHETIC FLUORPHLOGOPITE, TIN OXIDE, POTASSIUM SORBATE, SODIUM BENZOATE. [+/ -: IRON OXIDES (CI 77491) TITANIUM DIOXIDE (CI 77891), CARMINE (CI 75470)]

Bronzer & Contour: WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, TRIMETHYLSILOXYSILICATE, COCONUT ALKANES, POLYMETHYLSILSESQUIOXANE, METHYL TRIMETHICONE, BUTYLENE GLYCOL, PHENYL TRIMETHICONE, POLYETHYLENE, DIMETHICONE, SILICA, SORBITAN SESQUIOLEATE, DISTEARDIMONIUM HECTORITE, TOCOPHEROL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, POLYSILICONE-11, PROPYLENE CARBONATE, ETHYLHEXYLGLYCERIN, ISOPROPYL TITANIUM TRIISOSTEARATE, DIPROPYLENE GLYCOL, SODIUM CITRATE, SODIUM CHLORIDE, 1,2-HEXANEDIOL, CAPRYLYL GLYCOL, PHENOXYETHANOL. [+/- BISMUTH OXYCHLORIDE (CI 77163), TITANIUM DIOXIDE (CI 77891), IRON OXIDES (CI 77491, CI 77492 CI 77499)]

Color Correctors in Yellow WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, POLYMETHYLSILSESQUIOXANE, COCONUT ALKANES TRIMETHYLSILOXYSILICATE, PHENYL TRIMETHICONE, SILICA, METHYL TRIMETHICONE, POLYETHYLENE, DIMETHICONE, DISTEARDIMONIUM HECTORITE, SORBITAN SESQUIOLEATE, BUTYLENE GLYCOL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, POLYSILICONE-11, CAPRYLYL GLYCOL, SODIUM CHLORIDE, PHENOXYETHANOL, PROPYLENE CARBONATE, ISOPROPYL TITANIUM TRIISOSTEARATE, HEXYLENE GLYCOL, 1,2-HEXANEDIOL, DIPROPYLENE GLYCOL, SODIUM CITRATE, TOCOPHEROL. [+/-: TITANIUM DIOXIDE (CI 77891), BISMUTH OXYCHLORIDE (CI 77163), IRON OXIDES (CI 77492)]

Color Correctors in Green: WATER/AQUA, CYCLOPENTASILOXANE, ETHYL TRISILOXANE, POLYMETHYLSILSESQUIOXANE, COCONUT ALKANES TRIMETHYLSILOXYSILICATE, SILICA, METHYL TRIMETHICONE, POLYETHYLENE, PHENYL TRIMETHICONE, DIMETHICONE, SORBITAN SESQUIOLEATE, DISTEARDIMONIUM HECTORITE, BUTYLENE GLYCOL, DIMETHICONE/PEG-10/15 CROSSPOLYMER, POLYSILICONE-11, CAPRYLYL GLYCOL, SODIUM CHLORIDE, PHENOXYETHANOL, PROPYLENE CARBONATE, HEXYLENE GLYCOL, ISOPROPYL TITANIUM TRIISOSTEARATE, 1,2-HEXANEDIOL, PEG/PPG-18/18 DIMETHICONE, TRIETHOXYCAPRYLYLSILANE, DIPROPYLENE GLYCOL, SODIUM CITRATE, TOCOPHEROL. [+/-: TITANIUM DIOXIDE (CI 77891), BISMUTH OXYCHLORIDE (CI 77163), IRON OXIDES (CI 77492), CHROMIUM OXIDE GREENS (CI 77288)]

S/B Airbrush Cleaner: Cyclopentasiloxane

Q. What is the pressure range of the Pro Plus Compressor?

A: The dial on the Pro Plus Compressor allows you to adjust the airflow speed with a maximum of 30 psi.

Q. Is the Pro Plus Compressor rechargeable or does it need to be plugged in all the time?

A: This Pro Plus Compressor is not battery operated, so it does need to be plugged in to power on and use.

Q. What airbrush gun the Pro Plus Compressor compatible with?

A: The Pro Plus is compatible with an SP-35 or SP-40 Airbrush Gun, or the Airpod Pro using the Airpod Airbrush for Pro Plus and S-One Compressors (sold separately).